More Shots of the Mortis... Moti?

Enjoy!

Scale comparison 15mm Crusader and a 28mm Stormtrooper

I had a few people asking for a scale comparison of the upcoming 15mm scale Crusader and a 28mm miniature.

You can see it scales nicely for the 28mm crowd, the head is large enough to fit a pilot into and the overall size looks good.

Ghaaaw, I wish I went to Gencon

Spoke with some of the folks from WGF and they said that they had quite a few backers come say hello... Makes me very sad I could not attend. I would have loved to meet the folks that made this possible.

Here is a shot for Gencon

Next year come hell or high water, I will be there.

Gencon 25% off sale and a preview of the 28mm scale Leviathan Mortis and 15mm scale Leviathan Crusader

Unfortunately I did not make it to Gencon this year, real life issues of hunting for a new residence intruded on my fun.

If you can make it to Gencon, Wargames factory will be previewing the 15mm Leviathan Crusader and the 28mm Leviathan Mortis, both were painted for WGF by Matt Leahy. I think he did a fabulous job on these! Yes, that is the 15mm Crusader, all the details found on the 28mm model are present.

For those of you like myself who cannot attend Gencon, I just wanted to let you know that Wargames Factory if having a 25% off sale. Just be sure to use the discount code on checkout.

Wargames Factory site.

GENCON SALE!

All Wargame Factory and DreamForge-Games products on sale for 25% off! Sale ends Sunday August 18th at Midnight!

 Use the discount code of conspecial in our webstore shopping cart to receive the discount.

(Please note that our 3x and 7x deals do not apply during this sale)

 Leviathan Mortis

15mm Scale Leviathan Crusader

Painted Leviathan Crusader Nearing Completion

A  while back I was searching for a painter that could handle the Leviathan Crusader and Mortis as well as a few Eisenkern Stromtroopers. My search lead me to Poland, arguably some of the most talented painters in the world.
 
I was searching for a painter that could take the large open surfaces and give them a nice shaded worn and weathered look, someone who could bridge the gap between historic vehicles and Sci-fi. I stumbled on Przemyslaw Szymczyk, an extremely talented painter who had all the qualities I was looking for, and to my good fortune, an opening in his schedule. 

You can see what he did with the Stormtroopers here
 
Here you can see some W.I.P. pics of the Crusader. I think you will agree that his work is simply AMAZING! Przemyslaw has expressed an interest in painting the Leviathan Mortis and I am more than happy to oblige.

 I hope that I have the opportunity to work with him on future projects as well, he is a fantastic artist.
 
 Enjoy

 

 Lol.. NUTCRACKER and hello Kitty on the guns ;), this is all Przemyslaw

A look at the Eisenkern APC

 

I thought I would pass along some shots of the Eisenkern APC. When last you saw the design it was pretty much a roughed in hull, the final version received more details inside and out.

This kit will feature see through window sections so that you may view the interior, movable quad ‘Scorpion’ weapons system that provides enough arc, azimuth and elevation to clear unwanted guests from your doorstep. Linked and movable front suspension, doors and hatches that you may leave open or closed (Due to the scale I could not create full working hinges on the smaller doors and hatches, you may need to decide if you want to glue the smaller doors in the open or closed position, the larger rear hatch has full hinges). The Kickstarter backers will receive the full crew compliment, 10 riflemen, driver and gunner. I won’t know if we can include the ten riflemen in the general release until we know how many sprues we will need to complete the kit.

 

I was able to shrink the vehicle down a bit from the original render but it is still a BEAST! It is about a foot taller than the modern day Stryker APC but considerably wider and longer. Roughly 3 meters tall, 4.97 meter wide and 10.15 meters long. You won’t be parking this monster in a tight space without smashing a few bumpers.

This vehicle is as heavily armored as a main battle tank, weighing in at over 70 tons in rides on six huge solid tires, each with an independent drive system that allows this vehicle to spin in place, in the same manner as its tracked brethren.

The nose section is taken up by the reactor, this is the same full size reactor found on the Leviathan Crusader and Mortis, allowing the APC indefinite range and access to impressive speed… The reactor in this vehicle is capable of recharging equipment and the super capacitors found on lighter vehicles and Leviathan, in this way, the ‘Keilerkopf’ becomes a central part of any forward unit’s logistics.  Everything you need for planetary conquest.

Even with its monster size, the interior is still a bit cramped, eight riflemen are seated in the rear with just enough room for a trooper to stand, equip and egress. Two riflemen take up the ‘shotgun positions on either side of the APC’s driver and gunner and would likely use the side doors when possible.
 

 

Bruckenkophf's In Depth Review of the Leviathan Crusader!

Some time back I sent Dennis over at Bruckenkopf the last release of DreamForge kits.

 

For those of you that don’t know, Bruckenkopf is a premier gaming site over in Germany, they host discussion and review covering all aspects of the hobby. Google translate makes quick work of the site for those of you such as myself, who barely speak our native tongue :)

Last week I sent Dennis an email, asking if he had an opportunity to review the kit, he let me know it would be up in time for the German gaming events circuits that are now making their appearance.

I just wandered over, as I am apt to do, and I was blown away by the review they posted on the Crusader. They said this would be the most comprehensive review in their history… they did not exaggerate…Over 100 pictures and a wall of text, explaining the assembly and his thoughts, good and bad on the Leviathan Crusader.

 

 

Here is what Dennis had to say in his closing remarks (translated by Google)

We strive to critical reviews, highlight the advantages and disadvantages of the kits, but at best will want nothing struck us out of the stable branches casting / part-approaches some criticism as to the weight. For the Leviathan Crusader we can now certify whether as a supplement to an existing project or as a display model / modeling project, an unqualified buy recommendation.

All I can say is wow! Strap on your google translator and have a look for yourself…

Thank you Dennis for such an in depth review!

 

The Leviathan Mortis is now in plastic!

The Leviathan Mortis is now production ready! This was actually the first of the new generation of Leviathan I designed back in 2002... I still have a soft spot for the Mortis.

Unlike the old resin kits the fingers and scythe will remain completely poseable. Just like the Crusader, the Mortis is highly dynamic, arms move, legs move, waist moves.... great fun and ready for some smack down.

When will this hit retail? About 3-4 months, we hope... We will not make this available until all the Kickstarter backers have been shipped and are well on their way. Stay tuned for updates!

Cheers

Mark